ログイン 会員登録
icon_bulk_order一括注文 Acrobiosystems for English
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0-9
phone
Your Position: ホーム > Kits > protein A (SuRe) > RES-A029

resDetect™ Universal Protein A Quick ELISA Kit (Boiling-free)

For research use only.
  1. Universality - Suitable for detection of natural or structurally conserved recombinant forms of Protein A and alkaline-resistant Protein A variants, such as MabSelect SuRe™ and other ligands
  2. Fast time to results - less than 2 hours
  3. Accuracy - Tracebility of Protein A standards against BSA Standard with validated pharmacopoeia quantitation methodology
  4. Extensive validation - Validation Report (ICH compliant) available on request
  5. High sensitivity - Sensitivity < 40 pg/mL of recombinant Protein A and MabSelect™ SuRe Protein A or other Protein A ligands
  6. High IgG tolerance - Accurately quantify protein A in up to 20 mg/mL antibody
  7. Excellent buffer compatibility
    Product Details
    Assay TypeSandwich-ELISA
    AnalyteProtein A
    Format96T
    Regulatory StatusRUO
    Sensitivity<40pg/mL
    Standard Curve Range50 pg/mL-1600 pg/mL(Protein A)
    50 pg/mL-3200 pg/mL(PrismA)
    Assay Time2 hr
    Suitable Sample TypeFor the quantitative determination of recombinant Protein A, alkaline-resistant Protein A, PrismA and MaXtar® ARPA ligand Protein A.
    Sample volume25 μL
  • Background
    Protein A is a cell wall protein of Staphylococcus aureus, it has a variety of specific biological characteristics. Due to its high affinity with the Fc part of certain immunoglobulins (especially IgG), it is widely used in the purification of biopharmaceuticals (such as antibodies, vaccines, etc.). However, during the purification, protein A may leach from the purification column and result in contamination of the antibody drugs prepared. Once the remaining protein A enters the human body, it will easily activate the immune response of the organism, and there is a safety risk, so there are strict regulations on the residual level of Protein A in antibody drug preparations. Therefore, the detection of residual Protein A in antibody drugs purified from Protein A purification column is a key quality control step in the production process of antibody drug preparations.

    The resDetect™ Universal Protein A Quick ELISA Kit (Boiling-free) can detect protein A or unnatural protein A variants within 2 hours, it is high sensitive and easy to operate because the sample processing has been changed from the original boiling method to adding denaturing reagents. The sample processing process has been shortened by one hour. Whether in upstream small-scale trials or downstream large-scale of antibody production processes, this kit can help you to accurate analysis of samples, monitor the protein A levels and ensure product quality.

  • Application

    The kit is developed for the detection of natural or structurally conserved recombinant forms of Protein A and a recombinant form of Protein A with very significant structural differences from natural Protein A such as MabSelect SuReTM in Bioprocess manufacturing applications. It is used as a tool to aid in optimal purification process development and in routine quality control of in-process streams as well as final product.

    It is for research use only.

  • Storage
    Unopened kit should be stored at 2°C-8°C upon receiving.

    Find the expiration date on the outside packaging and do not use reagents past their expiration date.

    The opened kit should be stored per components table. The shelf life is 30 days from the date of opening.

    Materials Provided
    IDComponentsSize
    RES029-C01Pre-Coated Anti-Protein A Antibody Microplate1 plate
    RES029-C02AAlkali-Tolerant Recombinant Protein A Standard (1μg/mL)100 μL
    RES029-C02BMaXtar® ARPA ligand Protein A Standard (Bio-Link Co.) (1μg/mL)100 μL
    RES029-C02CRecombinant PrismA Standard (1μg/mL)100 μL
    RES029-C03Recombinant Protein A Standard (1μg/mL)100 μL
    RES029-C04Biotin-Anti-Protein A Antibody1.5 mL
    RES029-C05Streptavidin-HRP10 μg
    RES029-C0610×Sample Dilution Buffer15 mL
    RES029-C07Denaturation Buffer15 mL
    RES029-C0820×Washing Buffer30 mL
    RES029-C09Antibody Dilution Buffer15 mL
    RES029-C10Streptavidin-HRP Dilution Buffer15 mL
    RES029-C11Substrate Solution12 mL
    RES029-C12Stop Solution8 mL
  • Assay Principles
    The resDetect™ Universal Protein A Quick ELISA Kit (Boiling-free) is used to measure the levels of protein A and protein A variants by employing a standard sandwich-ELISA format. The micro-plate in the kit has been pre-coated with anti-protein A polyclonal antibody. Firstly, the standard samples provided in kit and your samples are treated with Denaturation Buffer to dissociation of protein A and antibody, stand a few minute. Before adding standards and samples, add the Biotin-Anti-Protein A Antibody to the plate to ensure that the standard samples are neutralized by the Biotin-Anti-Protein A Antibody buffer solution and protect the pre-coated antibody on the plate. Then, add the standard samples and your samples to the plate and form Antibody-antigen (Protein A) - biotinylated antibody complex, incubate and wash the wells. Next add Horseradish peroxidase conjugated streptavidin (Streptavidin-HRP) to the plate, incubate and wash the wells to remove any unbound reactants. At last, load the tetramethylbenzidine (TMB) substrate into the wells and monitor a blue color. The reaction is stopped by the addition of a stop solution and the color turns yellow. The intensity of the absorbance can be measured at 450nm and 630nm on a microtiter plate reader. The OD Value reflects the amount of protein A.
Typical Data Please refer to DS document for the assay protocol.
 protein A (SuRe) TYPICAL DATA

Detection of Recombinant Protein A by sandwich-ELISA Assay.
Immobilized Anti-Protein A Antibody can bind Recombinant Protein A. Detection was performed using Biotin-Anti-Protein A Antibody with sensitivity of 50 pg/mL (QC tested). For each experiment, a standard curve needs to be set for each micro-plate, and the specific OD value may vary depending on different laboratories, testers, or equipments. The following example data is for reference only.

 protein A (SuRe) TYPICAL DATA

Detection of Alkali-Tolerant Recombinant Protein A by sandwich-ELISA Assay.
Immobilized Anti-Protein A Antibody can bind Alkali-Tolerant Recombinant Protein A. Detection was performed using Biotin-Anti-Protein A Antibody with sensitivity of 50 pg/mL (QC tested). For each experiment, a standard curve needs to be set for each micro-plate, and the specific OD value may vary depending on different laboratories, testers, or equipments. The following example data is for reference only.

 protein A (SuRe) TYPICAL DATA

Detection of MaXtar® ARPA ligand Protein A (Bio-Link Co.) by sandwich-ELISA Assay.
Immobilized Anti-Protein A Antibody can bind MaXtar® ARPA ligand Protein A (Bio-Link Co.). Detection was performed using Biotin-Anti-Protein A Antibody with sensitivity of 50 pg/mL (QC tested). For each experiment, a standard curve needs to be set for each micro-plate, and the specific OD value may vary depending on different laboratories, testers, or equipments. The following example data is for reference only.

 protein A (SuRe) TYPICAL DATA

Detection of Recombinant PrismA by sandwich-ELISA Assay.
Immobilized Anti-Protein A Antibody can bind Recombinant PrismA. Detection was performed using Biotin-Anti-Protein A Antibody with sensitivity of 50 pg/mL (QC tested). For each experiment, a standard curve needs to be set for each micro-plate, and the specific OD value may vary depending on different laboratories, testers, or equipments. The following example data is for reference only.

Validation
Intra-Assay Statistics

Four samples of known concentration were tested ten times on one plate to assess intra-assay precision.

 protein A (SuRe) INTRA-ASSAY STATISTICS
Inter-Assay Statistics

Four samples of known concentration were tested in three separate assays to assess inter-assay precision.

 protein A (SuRe) INTER-ASSAY STATISTICS
Recovery

Add different concentrations of Protein A (0.2ng/mL、1ng/mL、10ng/mL) to different concentrations of Human IgG1 (Bevacizumab) (20mg/mL、10mg/mL、5mg/mL) or Human IgG4 (Toripalimab) (20mg/mL、10mg/mL、5mg/mL), then dilute the antibodies to a reasonable range, then test and calculated the concentration of protein A to give the recovery rate.

Add Recombinant Protein A to Human IgG1 (Bevacizumab) or Human IgG4 (Toripalimab):

 protein A (SuRe) RECOVERY

Add Alkali-Tolerant Recombinant Protein A to Human IgG1 (Bevacizumab) or Human IgG4 (Toripalimab):

 protein A (SuRe) RECOVERY

Add MaXtar® ARPA ligand Protein A (Bio-Link Co.) to Human IgG1 (Bevacizumab) or Human IgG4 (Toripalimab):

 protein A (SuRe) RECOVERY

Add Recombinant PrismA to Human IgG1 (Bevacizumab) or Human IgG4 (Toripalimab):

 protein A (SuRe) RECOVERY
Interference effect

We have conducted interference effect test about frequently-used buffers, they have excellent buffer compatibility. For specific buffers, it is recommended that you verify recovery to determine the minimum dilution ratio.

 protein A (SuRe) INTERFERENCE EFFECT
Specificity

Host cell protein (HCP 500 ng/mL) and host cell DNA (HCD 0.5 ng/mL) of HEK293, E.coli or CHO systems were added to human IgG1 (Bevacizumab, 1mg/mL) and human IgG4 (Toripalimab, 1mg/mL), respectively, which were higher than the usual quality standard limit. Then high, medium, and low concentrations of Protein A were added, respectively, and the ratio of Protein A recovery in the Protein A added samples without HCP and HCD was added as the specificity verification index. verification index.

 protein A (SuRe) SPECIFICITY
  • Clinical and Translational Updates

コメント (0)


ETD of in-stock products: 4 business days

価格(JPY) : 162,400

プロモーション&展示



データシート&ドキュメンテーション

DMF請求
DMF (Drug Master File)

関連製品一覧

新製品

お問い合わせ&コメント

This web search service is supported by Google Inc.

totopphone